KrosFlo® TFF System – Auxiliary Scale
The KrosFlo ® TFF System – Auxiliary Scale assembly and operation may vary based on application.
The instructions below are for general use. For questions about specific application set up or
customization, please contact your local Repligen representative.
Figure 1. KrosFlo® TFF System – Auxiliary Scale components
1. Display and operations keypad
2. Weighing pan
1. General precautions
• Remove the contents from the packaging. If a part is missing, contact Repligen for
replacement
• Prior to the first use, carefully read this User Guide. Use the device only as intended
• Scales to be decommissioned must be decommissioned in accordance with valid legal
regulations
2. KrosFlo® TFF System – Auxiliary Scale
Table 1. KrosFlo® TFF System – Auxiliary Scale parts
Figure 2. Auxiliary scale parts
1. ACSS-20K scale400-15001-000 Rev.
2. Weighing pan
3. Rubber foot with spring
4. Solid rubber foot
5. 3’ Interface cable
To Next Page
Loading...
Need help?
General
