Ricoh 8025e User Manual

Box Settings
155
4
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Box Setting].
D Check that [Program / Change] is selected.
E Select the box to program.
When programming a new box, press [*Not Programmed].
To change a box already programmed, press it, and then proceed to step
H
.
F Press [Transfer Box].
G Enter a Box name, and then press [OK].
H Enter a SUB Code.
To change the SUB Code, press [Clear] or the {Clear/Stop} key, and then try
again. To change Box name, press [Box Name], and then repeat from step
G
.
I Specify the condition of registration.
To program End Receivers, see "Programming End Receivers".
To program a password, see "Programming a password".
J Press [OK].
K Press [Exit].

Ricoh 8025e Specifications

General

Brand	Ricoh
Model	8025e
Category	All in One Printer
Language	English