Specifying the Administrator/Security Functions
102
6
Administrator Authentication
To specify administrator authentication, set Administrator Authentication Man-
agement to [On]. You can also specify whether or not to manage the items in Sys-
tem Settings as an administrator.
If you have not registered any administrator, you can obtain each administra-
tor’s authority with the “Administrator 1” setting. To log on as an administrator,
use the default login user name and login password.
Preparation
For details about logging on and logging off with administrator authentica-
tion, see p.106 “Logging on Using Administrator Authentication”, p.107
“Logging off Using Administrator Authentication”.
The “Administrator 1” defaults are “admin” for the login name and blank for
the password. If user authentication has been specified, a screen for authenti-
cation appears. To specify administrator authentication, log on as an admin-
istrator by entering “admin” as the login user name and leaving the login
password blank.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [Administrator Authentication Management].
E Specify each administrator authentication.
Specifying User Management Authentication
A Press [User Management], and then press [On].
B To specify address book management, press [Administrator Tools].
To Next Page
Loading...
Need help?
General
