31
3. Installing Options
Available Options
This section describes how to install options.
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For the specifications of each option, see Main-
tenance Guide.
CAUTION:
Important
❒ The voltage rating of the connector for options is 24 V DC or less.
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
GaiaP1GB_Setup-F4_FM_forPaper.book Page 31 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
Need help?
General