IEEE 1394 Configuration
73
5
Note
❒ Do not set the same IP address
as that used for the Ethernet net-
work settings or in the same
subnet. Also, do not specify the
same subnet mask.
❒ Do not set “011.022.033.044” as
the IP address.
❒ To get the IP address for the
printer, contact your network
administrator.
G Press the {U} or {T} key to enter
the left most entry field of the IP
address, and then press the {# En-
ter} key.
The pointer (k) moves to the next
entry field automatically.
Note
❒ The value moves by 10 if the
{U} or {T} key is kept pressed.
❒ You can return the pointer (
k
) to
the previous (left) entry field by
pressing the {Escape} key.
❒ If you press the {Escape} key
when the pointer (k) is on the
leftmost position, the selected
IP address is reset.
H Set other fields similarly, and
then press the {# Enter} key.
The settings are made and after
about two seconds, the screen re-
turns to the IEEE 1394 setting
menu.
I Set “Subnet Mask1394” in the
same way.
J Press the {Online} key.
“Ready” appears on the display.
K Print a configuration page to con-
firm the settings made.
Reference
For printing the configuration
page, see “Printing a Configura-
tion Page”, Software Guide.
SCSI print
A Press the {Menu} key.
“Menu” appears on the display.
B Press the {U} or {T} key to dis-
play “Host Interface” menu, and
then press the {# Enter} key.
The interface setting menu ap-
pears.
C Press the {U} or {T} key to dis-
play “IEEE 1394 Setup”, and then
press the {# Enter} key.
The IEEE 1394 setting menu ap-
pears.
IP Address1394:
19k.022.033.044
IP Address1394:
192.02k.033.044
Menu:
Host Interface
AET005S
GaiaP1GB_Setup-F4_FM_forPaper.book Page 73 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
Need help?
General