Setting of Original Feed Type
117
6
Divide
This section explains settings for dividing multiple originals by a specified
number of pages and then sending them.
A Press [Original Feed Type].
B Press [Divide / Stamp], and then [Divide].
C Press [Change], and then use the number keys to enter the number of pages
you want to divide the job into sets of.
D Press the {q} key.
E If necessary, press [Division Check].
When you select [Division Check], if the originals were not scanned in due to a
paper jam or multi-sheet feed, a screen for stopping or continuing scanning
appears at the end of the scan.
F Press [OK] twice.
The current settings are displayed.
To Next Page
Loading...
Need help?
General