Simultaneous Storage and Sending by Scan to Folder
55
2
Simultaneous Storage and Sending by
Scan to Folder
This section explains how to store a file and simultaneously send it by Scan to
Folder.
A Press [Store File].
B Press [Send & Store].
C If necessary, specify the stored file's information, such as [User Name], [File
Name], and [Password].
For details, see "Specifying File Information for a Stored File".
D Press [OK].
E Specify the destination, make any other necessary settings, and then send
the file.
For details about sending a file by Scan to Folder, see "Basic Operations When
Using Scan to Folder".
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult your
administrator.
❒ You can resend stored files by Scan to Folder. To resend stored files, select
the files on the screen for selecting stored files, and then send them. For de-
tails, see "Sending a Stored File".
To Next Page
Loading...
Need help?
General