133
7. Appendix
The appendix details specifications of the scanner function and explains supple-
mentary settings.
Relationship between Resolution and
Scan Size
This section explains the relationship between resolution and scan size.
Resolution and scan size are inversely related. The higher the resolution (dpi) is
set, the smaller the area that can be scanned. Conversely, the larger the scan area,
the lower the resolution that can be set.
The relationship between the scanning resolution and the scan size is shown be-
low. If the combination is unreadable, "
Exceeded max. data capacity. Check
the scanning resolution, then press Start again." appears on the ma-
chine's control panel display. Change the condition until scanning is enabled.
Note
❒ Image compression level can limit Maximum image size.
To Next Page
Loading...
Need help?
General