Sending Scan Files by E-mail
30
1
Simultaneous Storage and Sending by E-mail
This section explains how to store a file and simultaneously send it by e-mail.
A Press [Store File].
B Press [Send & Store].
C If necessary, specify the stored file's information, such as [User Name], [File
Name], and [Password].
For details, see "Specifying File Information for a Stored File".
D Press [OK].
E Specify the destination, make any other necessary settings, and then send
the e-mail.
For details about sending a file by e-mail, see "Basic Operation for Sending
Scan Files by E-mail".
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult your
administrator.
❒ You can resend stored files by e-mail. To resend stored files, select the files
on the screen for selecting stored files, and then send them. For details, see
"Sending a Stored File".
Reference
p.61 “Specifying File Information for a Stored File”
p.12 “Basic Operation for Sending Scan Files by E-mail”
p.69 “Sending a Stored File”
To Next Page
Loading...
Need help?
General