2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
Front and left view
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. Exposure glass
Place originals face down here. For details, see page 69 "Placing Originals on the Exposure Glass".
3. Copy tray
Copied/printed paper and fax messages are delivered here.
4. Human Detect Sensor
The human detection sensor is on the right side of the machine. For details, see "Human Detection Sensor",
Getting Started.
29
To Next Page
Loading...
Need help?
General