4. Fax
This chapter describes frequently used facsimile functions and operations. For information not included in
this chapter, see Fax available on our website.
Basic Procedure for Transmissions (Memory
Transmission)
This section describes the basic procedure for transmitting documents using Memory Transmission.
You can specify the fax, IP-Fax, Internet Fax, e-mail, or folder destinations. Multiple types of destination
can be specified simultaneously.
• It is recommended that you call the receivers and confirm with them when sending important
documents.
• If there is a power failure (the main power switch is turned off) or the machine is unplugged for
about one hour, all the documents stored in memory are deleted. As soon as the main power
switch is turned on, the Power Failure Report is printed to help you check the list of deleted files. See
"When an Error Is Notified via a Report or E-Mail", Troubleshooting.
When Using the Fax Application
About how to use the application's screen, see page 46 "[Fax] Screen".
When Using the Fax (Classic) Application
For details about how to use the classic fax function, see page 91 "Procedure for Sending
Originals Using the ADF (Classic)".
For details about how to use the classic fax function, see page 93 "Procedure for Sending
Originals Using the Exposure Glass (Classic)".
Procedure for Sending Originals Using the ADF (Classic)
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Fax (Classic)] icon.
91
To Next Page
Loading...
Need help?
General