32
English
Basic Operations
Powering Off the Projector
1. Press the “ ” button and you will see a message as below on
the on-screen display.
Power Off?
Press power key again.
2. Press the “ ” button again to turn off the projector lamp.
3. The cooling fan continues to operate for about 30 seconds for
cooling cycle and the Power indicator will ash red. After
cooling down, the light stops ashing, and then the projector
will enter the standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
the “ ” button to restart the projector.
4. Disconnect the power cord from the electrical outlet and the
projector.
To Next Page
Loading...
Need help?
General
