English
61
English
LAN Control
Volume Adjust the volume by +/- button.
Value will return to the initial value when you
click the Reset button.
No Signal
Power Off
Select from the pull-down list the time to
automatically turn off the power after signal
is displayed. Power turns off automatically if
you select Off.
Lamp power Switch the power of lamp.
Aspect Switch the aspect ratio.
Network Settings
Set the network of the projector.
►
Automatically configuring the network settings from DHCP.
Check automatic setting and then click “Apply”.
►
Configuring the network settings manually.
Check manual setting, enter appropriate values in the IP
address, Subnet Mask, Default Gateway (Gateway) and DNS
Server fields, and then click "Apply".
IPV6 cannot be used
in this device.
N
o
t
e
To Next Page
Loading...
Need help?
General
