Changing Operation Modes
You can switch between copier, scanner, and fax modes by pressing the corresponding keys.
Press the [Copy], [Scanner], or [Facsimile] key to switch to each mode. While operating in each mode,
the corresponding key lights up.
Function Priority
By default, the machine switches to the copier mode when it is turned on, or if the preset [System
Auto Reset Timer] time passes with the machine left idle while displaying the initial screen of another
mode. You can change the mode to switch to in such conditions using [Function Priority] under
[Admin. Tools].
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [System Auto Reset Timer] or [Function Priority], see page 228 "Administrator
Settings".
Multi-access
This machine can perform multiple jobs using different functions, such as copying and faxing, at the
same time. Performing multiple functions simultaneously is called "Multi-access".
The following table shows the functions that can be performed simultaneously.
Current job Types of jobs that can be executed simultaneously
Copying
• Fax memory transmission
• Fax memory reception
• Internet Fax reception (no printing)
• Receiving a LAN-Fax job from a computer
• LAN-Fax transmission
Initial Setup
35
To Next Page
Loading...
Need help?
General
Weight and Dimensions
