28
Try Out the Various Performance Features
Transpose (Trans)
On the PLAY screen of each mode, you can transpose the pitch of the keyboard in
semitone steps, over a range of G–F# (-5– +6 semitones) by adjusting the Transpose
parameter’s value.
Press [CURSOR] to move the cursor to “Trans” in the upper part of the screen, and
turn the VALUE dial or press [INC] or [DEC] to change its setting.
fig.Q-35
Hold Pedal
If an optional pedal switch (DP-2, DP-6, etc.) is connected to the rear panel HOLD
PEDAL jack, you can press the pedal switch to cause notes to sustain or “hold” even
after their keys have been released.
fig.Q-36
For details, refer to
“Transposing the Keyboard
in Semitone Steps
(Transpose)” (Owner’s
Manual; p. 36).
To Next Page
Loading...
Need help?
General
