5
Getting Ready
Adjusting the Display Contrast (LCD Contrast)
The characters in the display may be difficult to view immediately after turning on
the Fantom’s power or after extended use. Your viewing angle or the current lighting
conditions can also affect the appearance of the display. In such situations, you can
turn the CONTRAST knob (located on the rear panel) to adjust the contrast of the
display.
fig.Q-04
Turning Off the Power
1
Before you turn off the power, consider these two questions:
• Have the volume controls for the Fantom and all connected audio devices been
turned to their lowest settings?
• Have you saved your Fantom sounds or other data you’ve created? (Owner’s
Manual; p. 45, p. 72, p. 93, p. 114, p. 178, p. 189)
2
Turn off the power for all connected audio devices.
3
Turn off the POWER ON switch of the Fantom.
Backlight Saver
The backlight of the display has a finite life span, and if the backlight becomes dim
or fails to light, the display screen will be dark and difficult to read.
With the factory default settings, the Backlight Saver function is switched off.
However, in order to maximize the life of the backlight, we recommend that you
turn the Backlight Saver function on (Owner’s Manual; p. 180).
To Next Page
Loading...
Need help?
General
