40
Registering Your Favorite Performance Settings
Storing Your Performance Settings (Registration)
Settings for your performances can be stored at the various Tone buttons.
With the factory settings, recommended performance settings have already been stored. If you want to create an original registration, we suggest that
you start with registrations 4-1 through 4-5.
* Note that when you store a registration, the settings that were stored at the store destination will be overwritten and lost.
MEMO
For more about the settings saved in a registration, refer to “Items Stored in a Registration” (p. 69).
1. Make the desired Session Partner settings (p. 34) and choose the desired tone(s) (p. 19).
2. Press the [DISPLAY] button a number of times to access the Registration screen.
“REGIST” will be shown on the top line of the display.
3. While continuing to hold down the [DISPLAY] button, press the Tone button ([PIANO], [E. PIANO], [ORGAN], or [OTHERS]) to which
you want to store your settings.
4. Continuing on from step 3, hold down the [DISPLAY] button while you select a Variation by pressing the [-] or [+] button.
Variation number
Button number
MEMO
Steps 3 and 4 require that you continue holding down the [DISPLAY] button.
5. Once you’ve completed step 4, you can take your nger away from the [DISPLAY] button.
Your performance settings will be stored.
* Never turn o the power while the entire display is blinking.
MEMO
• To select a registration that you’ve stored, refer to “Recalling a Registration” (p. 41).
• You can return the stored contents to their factory-set condition. Refer to “Restoring the Factory-set Condition (FCT RSET)” (p. 56).
• The registrations you create can be stored (p. 54).
• The registrations you’ve created can be stored together as a registration set.
To Next Page
Loading...
Need help?
General
