42
Hi-Hat Control Pedal Adjustment
The volume of the sound played when pressing the hi-hat control pedal can be adjusted.
fig.Pedal-01
1.
Be sure the POWER is OFF, then hold down [LEVEL/PAN] and turn on the power.
“Pedal Modify” appears in the scroll display, then the Foot Closed level is indicated, and [LEVEL/PAN]
flashes.
2.
Press [+] or [-] to adjust the Foot Closed level.
Value:
0–15
(initial value: 10)
When adjusting the OVERALL hi-hat volume, follow the instructions in
“Instrument
Volume & Pan [LEVEL/PAN]”
(p. 25).
3.
When you’re finished, press [DRUM KIT]; the [LEVEL/PAN] light goes off.
Do not turn off the power without the [LEVEL/PAN] light having gone out. Otherwise you
will lose the changes you have just made.
Adjusting the Hi-Hat’s Foot Closed Level
23 1
1
TD-3_e.book 42 ページ ２００７年９月１８日 火曜日 午後２時４０分
To Next Page
Loading...
Need help?
General