Roland XV-5050 User Manual

28
Playing Sounds
Playing Different Patches In Different Areas
of the Keyboard (Split)
In a Performance, you can divide the keyboard into separate ranges and assign a
different Patch to each range. This can be done by selecting the same MIDI reception
channel for multiple Parts and then changing the pitch range over which each Part
plays. This type of keyboard setup is referred to as a Split .
A split is like a layer in which the Parts’ pitch ranges don’t overlap (Playing Multiple
Layered Patches).
Let’s create a split using Performance “PB:029 Organ/Lead.”
Selecting Performance “PB:029 Organ/Lead”
1.
Press [PERFORM] to make its indicator light.
2.
Use [BANK ] and [VALUE] to choose “PB:029 Organ/Lead.”
Play your MIDI keyboard (MIDI transmit channel = 1).
In this Performance, the note range settings for Part 2 and Part 3 are shown below.
Part 2: C4–G9
Part 3: C-1–B3
fig.0-12
2
2
1
XV-5050_e.book 28 ページ ２００３年６月２７日 金曜日 午後３時１４分

Roland XV-5050 Specifications

General

Brand	Roland
Model	XV-5050
Category	Inverter
Language	English