Hardware Installation and Reference Guide Product Overview
34
System is operating normally.
The temperature at the air intake and exhaust vents
exceeds the threshold.
1. The temperature at the air intake and exhaust vents
exceeds the threshold greatly.
2. The system is not functioning properly.
No link is detected for this port.
The port has made a successful 1000 Mbps link.
The port is sending and receiving traffic at 1000 Mbps.
The port has made a successful 10/100 Mbps link.
The port is sending and receiving traffic at 10/100 Mbps.
No link is detected for this port.
The port has made a successful 1/10 Gbps link.
The port is sending and receiving traffic at 1/10 Gbps.
10/100/1000Base-T
Ethernet Port LED
No link is detected for this port.
The port has made a successful 10/100/1000 Mbps link.
The port is sending and receiving traffic at 10/100/1000
Mbps.
LED Mode Button
The LED Mode button is used to switch the LED mode. The green LED Mode indicator indicates the switching status. Press the LED
Mode button, and the LED Mode indicator will turn yellow, indicating the PoE status. Press the LED Mode button again, the indicator
switches to indicating the switching status.
If you want to switch the LED mode, press the button for over two seconds.
1.10 RG-S5310-48GT4XS-P-E
Specifications
Dual-core CPU with the clock speed of 1.2 GHz
SFP Modules and SFP BIDI Modules
To Next Page
Loading...
Need help?
General