Basic Functions
43
EN
Darkening or lightening a copy
To darken or lighten the copy:
1
Lift the scanner lid, and place the document face down in the right-front corner of
the scanner glass.
2
Close the lid.
3
Press
Menu
.
4
With
Copy Document
selected, press
OK
.
5
Press to select
Brightness
.
6
Press to select a number below zero for a darker copy, or press to select a
number above zero for a lighter copy.
7
Press
Start
to begin copying.
Copying a photograph
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
Using the default settings to copy a photograph
You can copy a document using the default settings (see Resetting factory defaults, page
71), or you can adjust the quantity, size, quality, and brightness of your copies (see
Save as Defaults, page 34).
To copy a photograph using the current default settings:
1
Load photo paper into the printer (see Loading photo paper, page 12).
2
Lift the scanner lid, and place the photograph face down in the right-front corner of
the scanner glass.
To Next Page
Loading...
Need help?
General
