Troubleshooting
84
EN
Wi-Fi connectivity LED
Wi-Fi connec-
tivity LED
What it means
Off The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continu-
ously
The Wi-Fi radio is turned on, and the printer is searching for
available wireless networks within range.
Blinks intermit-
tently
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted, or is too weak to send signals
to and from the printer.
To find and connect to an available wireless network within
range, press
OK
, turn the Wi-Fi radio off, and run the Wi-Fi Setup
Wizard (see Connecting to a wireless network, page 13).
On The Wi-Fi radio is turned on, and there is a working connection
between the printer and a wireless network.
To Next Page
Loading...
Need help?
General
