Getting started_ 22
2.getting started
This chapter gives you step-by-step instructions for setting up the USB connected machine and software.
This chapter includes:
• Setting up the hardware
• Supplied software
• System requirements
• Installing the driver locally
Setting up the hardware
This section shows the steps to set up the hardware, as is explained in the
Quick Install Guide. Make sure you read the Quick Install Guide first and
follow the steps below:
1. Select a stable location.
Select a level, stable place with adequate space for air circulation. Allow
extra space to open covers and trays.
The area should be well ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the
altitude setting to optimize your printing. (See
"Altitude adjustment" on
page 40.)
Place the machine on a flat, stable surface so that there is no incline
greater than 2 mm (0.08 inch). Otherwise, printing quality may be
affected.
2. Unpack the machine and check all the enclosed items.
3. Remove tape holding the machine securely.
4. Install the toner cartridge.
5. Load paper. (See "Loading paper in the tray" on page 43.)
6. Make sure that all cables are connected to the machine.
7. Turn the machine on.
This equipment will be inoperable when mains power fails.
Supplied software
After you have set up your machine and connected it to your computer, you
must install the printer software. If you are a Windows or Macintosh OS,
install the software from the supplied CD and if you are a Linux OS user or
UNIX OS user, download the software from the Samsung website
(www.samsung.com/printer) and install.
Machine software are occasionally updated due to release of new
operating system and etc. If needed, download the latest version from
the Samsung website. (www.samsung.com/printer)
OS Contents
Windows • Printer driver: Use this driver to take full advantage
of your machine’s features.
• PostScript printer driver: Use the PostScript driver
to print documents with complex fonts and graphics
in the PS language. (PostScript printer description
file is included.)
• Samsung Easy Printer Manager: Samsung Easy
Printer Manager combines device settings as well as
printing environments, settings/actions and
launching. All of these features provide a gateway to
conveniently use your Samsung machine.
• Samsung Printing Status: This program allows
you to monitor the machine’s status and alerts you
when an error occurs during printing.
• Direct Printing Utility: This program allows you to
print PDF files directly.
• SetIP: Use this program to set your machine’s
TCP/IP addresses.
Macintosh • PostScript printer driver: Use this driver to run
your machine from a Macintosh computer and print
documents. (PostScript printer description file is
included.)
• Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
• SetIP: Use this program to set your machine’s
TCP/IP addresses.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
