Media and tray_ 42
5.media and tray
This chapter provides information on how to load print media into your machine.
This chapter includes:
• Selecting print media
• Changing the tray size
• Loading paper in the tray
• Printing on special media
• Setting the paper size and type
• Using the output support
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the guidelines
for use with your machine.
Guidelines to select the print media
Print media that does not meet the guidelines outlined in this user’s guide
may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
• The type, size and weight of the print media for your machine are
described in print media specifications. (See "Print media specifications"
on page 92.)
• Desired outcome: The print media you choose should be appropriate for
your project.
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
• Some print media may meet all of the guidelines in this section and
still not produce satisfactory results. This may be the result of
improper handling, unacceptable temperature and humidity levels,
or other variables over which cannot be controlled.
• Before purchasing large quantities of print media, ensure that it
meets the requirements specifications in this user’s guide and
meets your output requirements.
• Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not covered by
the warranty or service agreements.
• Using inflammable print media can cause a fire.
• Use designated print media (See "Print media specifications" on
page 92).
The use of inflammable media or foreign materials left in the printer
may lead to overheating of the unit and, in rare cases may cause a
fire.
The amount of paper put into the tray may differ according to media type
used. (See
"Print media specifications" on page 92.)
Media sizes supported in duplex mode
Changing the tray size
The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
1. Push the back plate of the tray outwards completely so that it can extend
the length of the tray.
2. Squeeze the paper length guide and slide it to the correct position for the
paper size you are loading, which is marked at the bottom of the tray.
Mode Size Type Source
Duplex
printing
a
a. 60 to 120 g/m
2
(16~32 lb bond) only.
Letter, A4,
Legal, US Folio,
Oficio
Plain, Color,
Preprinted,
Recycled,
Thick
b
, Thin
c
b.If media weight is 120 g/m
2
(32 lb bond), load a paper into the
multi-purpose tray one by one.
c. If media weight is 60 g/m
2
(16 lb bond), select the Thin type.
• tray 1
• optional trays
• multi-purpose tray
1 Paper length guide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
