Samsung CLP-775ND User Manual

Supplies and accessories_ 85
3. Grasp the handles on the empty print cartridge and pull to remove the
cartridge from the machine.
If you open the front cover, be careful not to touch the underneath
the control panel (the lower part of the fuser unit). The temperature
of the fuser unit might be high and could damage your skin.
When you open the front cover and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer
belt.
4. Remove the new toner cartridge from its bag.
• Don't use sharp objects, such as a knife or scissors, to open
the print cartridge package. You could damage the surface of
the print cartridge.
• To prevent damage, do not expose the print cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5. Slowly shake the cartridge five or six times to distribute the toner evenly
inside the cartridge. It will assure maximum copies per cartridge.
6. Place the print cartridge on a flat surface, as shown, and remove the
paper covering the print cartridge by removing the tape.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Do not touch the green surface, the OPC drum of the cartridge.
Use the handle on the cartridge to avoid touching this area.
7. Make sure that the color of the print cartridge matches the color slot and
then grasp the handles on the print cartridge. Insert the cartridge until it
clicks into place.
8. Holding the handle on the paper transfer belt, align it with the slots on
the inside of the front cover.
9. Lower the paper transfer belt until it is parallel with the front cover and
firmly seated.
10. Close the front cover. Make sure that the cover is securely closed.
If the front cover is not completely closed, the machine will not
operate.
Replacing the paper transfer belt
Click this link to open an animation about replacing a paper transfer

Samsung CLP-775ND Specifications

General

Network ready	Yes
Supported network protocols (IPv4)	TCP / IPv4 / v6, SNMPv2 / v3, HTTP (S), DHCP / BOOTP
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	10 s
Time to first page (color, normal)	11 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	120000 pages per month
Number of print cartridges	4
Page description languages	PCL 5e, PCL 6, PDF 1.7, PostScript 3
Maximum internal memory	896 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	54 dB
Display	LCD
Total input capacity	500 sheets
Total output capacity	350 sheets
Multi-Purpose tray input capacity	100 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Plain paper, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Power consumption (standby)	8 W
Power consumption (printing)	60 W
Sustainability certificates	ENERGY STAR
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 7 (32 bit, 64 bit) / 2008 (32 bit, 64 bit) / Vista (32 bit, 64 bit) / 2003 (32 bit, 64 bit) / XP (32 bit, 64 bit) / 2000 [Linux] RedHat Enterprise Linux WS 4, 5 (32 / 64 bit), Fedora 5 ~ 13 (32 / 64 bit), SuSE Linux 10.1 (32 bit), OpenSuSE 10.2, 10.3, 11.0, 11.1, 11.2 (32 / 64 bit), Mandriva 2007, 2008, 2009, 2009.1, 2010 (32 / 64 bit), Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04 (32 / 64 bit), SuSE Linux Enterprise Desktop 10, 11 (32 / 64 bit), Debian 4.0, 5.0 (32 / 64 bit) [MAC] Mac OS X 10.3 ~ 10.6 [Unix] Sun Solaris 9, 10 (x86, SPARC), HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium), IBM AIX 5.1, 5.2, 5.3, 5.4

Weight and Dimensions

Dimensions (WxDxH)	446 x 481 x 464 mm