32 Section 2A. Phone Basics
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four digits of the number.
2. Select the Abbrev. Dial entry from the screen and
press .
Dialing From the Contacts List
1. Select and press > Contacts.
– or –
Press
Contacts (right softkey) from the main menu.
2. Select the entry you want to call and press to
dial the entry’s default phone number.
– or –
To dial another number from the same entry, select
the name, press , and then select a number
and press .
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you
can dial speed dial entries using one keypress for
locations 2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
䊳 Press and hold the appropriate key for
approximately two seconds. The display confirms
that the number has been dialed when it shows
the calling animation.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows the calling
animation.
Note
Speed dialing is not available when you are roaming;
when you are roaming off the Sprint National
Network, you must always dial using eleven digits
(1 + area code + number).
Sprint M540.book Page 32 Tuesday, April 7, 2009 3:38 PM
To Next Page
Loading...
Need help?
General
