English _97
● SETUP SCREEN
Focus setup (SNB-6004)
You can adjust the focus of video image.
1. From the Setup menu, select the
<Video & Audio (
)> tab.
2. Click <Focus setup>.
3.
Set up the focus in the following
sequence.
1) Focus initialize : Click [ ] button
to move to the default flange back
position.
2) Focus (Adjust Lens) : Manually adjusts
the Len’s focus (Far
Near) and
ensure the image clear.
3) Simple focus : Drag your mouse on the video to set the location for auto focus.
Click [
] button to fit the focus automatically.
J
`
The Simple focus mode may not fit correctly in the following cases:
-
Sudden change to the object in Simple focus mode (sudden movement, appearance or
disappearance)
-
Radical change to the brightness in Simple focus mode
-
Image of a low contrast
-
If the camera is exposed to a strong light source in the front or surroundings
`
In case the focus is inappropriate apart from mentioned above, use [ , , , ,
, ] button to manually adjust the focus.
`
In a situation where Simple focus is hardly applied, try to use the manual focus mode.
M
`
For SNB-6003, set the lens mode(shutter) to <Manual> to adjust the focus. After the focus is
adjusted, select a desirable lens mode.
To Next Page
Loading...
Need help?
General
