- 16 -
Maintenance and Ckeaning
Turn off the projector, and unplug the AC power cord from the
AC outlet.
1
2
3
4
Pull out the air filter from the projector.
Clean the filter with brush out dust and particles.
Replace the air filter in a projector.
AIR FILTER
AIR FILTER
CAUTION
Do not operate the projector with the Air Filter(s)
removed. Dust may accumulate on the LCD Panels
and Projection Mirrors degrading the picture quality.
Do not put anything into the air intake vents. Doing
so may result in a malfunction of the projector.
Failure to properly clean the projector's air filters
(in accordance with the instructions in your
Projector's Operating Manual, or more frequently
in any environment which is somewhat dusty or
smoky) could result in overheating and will void the
warranty on the projector.
✔Note:
• If the filter is heavily clogged and unable to
clean, replace it with new ones. Please consult
your dealer for details.
• Do not wash the filter with water or any other
liquid matter.
Air Filter Parts No. 610 334 1057
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become clogged
with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect
the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter immediately. Clean the filter by
following the steps below.
Be sure to reset the Filter counter after cleaning or replacing
the filter.
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to
Filter counter and then press the SELECT button.
A dialog box appears showing the Used time option and the
Scrolls remaining option. Use the Point ed buttons to select
Used time.
1
2
Filter counter
Select Reset and the “Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset the
Filter counter.
Another confirmation dialog box appears, select [Yes] to reset
the Filter counter.
3
Used time shows the total accumulated time of the filter use,
a timer setting option, and the Reset option. Select Reset and
the “Filter counter Reset?” appears. Select [Yes] to continue.
4
AIR FILTER
Air lter Care and Cleaning
Resetting the Filter Counter
To Next Page
Loading...
Need help?
General
Weight and Dimensions
