EasyManuals Logo
Home>Sanyo>Projector>PLC-XU101

Sanyo PLC-XU101 User Manual

Sanyo PLC-XU101
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
Basic Operation
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.
Zoom Ring
Focus Ring
1
2
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog
box will appear on the screen for a few seconds.
Press the MUTE button on the remote control to cut off the
sound. To restore the sound to its previous level, press the
MUTE button again or press the VOLUME+/– buttons.
Mute function is also effective for AUDIO OUT jack.
Press the Point 7 8 buttons to cut off the sound. Dialog
box display will be changed to “On” and the sound will be
cut off. To restore the sound to its previous level, press the
Point 7 8 buttons again.
Press the Point ed buttons to move the red frame
pointer to the item that you want to select, and then
press the SELECT button.
Approximate level of
the volume.
Exit the Sound Menu.
Approximate level
of the volume.
Press the MUTE button to set the Mute function
On or Off. The display will disappear after 4
seconds.
Sound Menu
Sound Menu
icon
Volume
Remote Control
VOL+ button
VOL- button
MUTE button
Volume
Mute
Press the Point 8 button to turn up the volume, and press
the Point 7 button to turn down the volume.
Mute
Direct Operation
Menu Operation
Sound Adjustment
Top Control
VOLUME+/- buttons
Zoom and Focus Adjustment

Table of Contents

Other manuals for Sanyo PLC-XU101

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XU101 and is the answer not in the manual?

Sanyo PLC-XU101 Specifications

General IconGeneral
Matrix size0.8 \
Vertical scan range50 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility33 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical±40 °
OutputD-Sub15 x 1
Video inRCA x 1
Audio inputYes
Aspect ratio4:3
Dimensions (WxDxH)334 x 232 x 78 mm
Connectivity technologyWired
Lamp power275 W
Light source typeLamp
Noise level29 dB
Dot clock scanning frequency140 MHz
Audio (L/R) in2
Headphone outputs1
Display resolution786 x 432 pixels
Power consumption (typical)385 W
Weight and Dimensions IconWeight and Dimensions
Weight3500 g

Related product manuals