EasyManuals Logo
Home>Sanyo>Projector>PLC-XU101

Sanyo PLC-XU101 User Manual

Sanyo PLC-XU101
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
Video Input
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to the AV System Menu icon.
1
Video System Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
2
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to a
system and press the
SELECT button.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
Auto
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu icon
Selected system is
displayed.
Note:
The AV System Menu cannot be selected when selecting RGB(Scart).

Table of Contents

Other manuals for Sanyo PLC-XU101

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XU101 and is the answer not in the manual?

Sanyo PLC-XU101 Specifications

General IconGeneral
Matrix size0.8 \
Vertical scan range50 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility33 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical±40 °
OutputD-Sub15 x 1
Video inRCA x 1
Audio inputYes
Aspect ratio4:3
Dimensions (WxDxH)334 x 232 x 78 mm
Connectivity technologyWired
Lamp power275 W
Light source typeLamp
Noise level29 dB
Dot clock scanning frequency140 MHz
Audio (L/R) in2
Headphone outputs1
Display resolution786 x 432 pixels
Power consumption (typical)385 W
Weight and Dimensions IconWeight and Dimensions
Weight3500 g

Related product manuals