Sharp AQUOS CRYSTAL 2 User Manual

15
Getting Started
AQUOS CRYSTAL 2
Touchscreen Operations
Handset uses a touchscreen-type Display. Operate with your
fingers on Display.
Touchscreen Usage Cautions
Touchscreen Operation
To prevent malfunctions, observe the following.
・Do not use with wet fingers or if Display is wet. If
Display is wet, wipe it with a soft cloth.
・Do not use with gloves/long fingernails, pens, pencils or
sharp objects.
・Do not use with objects on/against Display.
Display Care
Do not place a sticker or shield (commercially-available
protective film, privacy protector shield, etc.) on Display.
In Case of Unexpected Touchscreen Response
If handset initiates operation without Touchscreen
(Display) being operated or does not respond after
Touchscreen being operated, try the following.
(Display turns off) (Display turns on)
Use Touchscreen
Tap
Contact Display lightly and briefly.
Touch & Hold
Contact Display lightly; release finger when screen changes.
Drag
Touch icon or other item lightly, move it where desired, and
release finger.
Flick
Contact Display lightly, then brush screen up/down or left/
right.
Pinch/Spread
Contact Display lightly, then move fingers toward each other
(Pinch) or away from each other (Spread).

Sharp AQUOS CRYSTAL 2 Specifications

General

Brand	Sharp
Model	AQUOS CRYSTAL 2
Category	Cell Phone
Language	English