37
Basic Operations
AQUOS CRYSTAL 2
Unlocking Screen
When Display is turned off (Screen lock active),
Welcome sheet (lock screen) opens.
・Welcome sheet (lock screen) may not open depending on
handset settings; use handset normally.
In Welcome sheet (lock screen), Drag up
Screen is unlocked.
・The appearance of icon may differ depending on handset
settings.
・If confirmation appears, follow onscreen prompts.
・For enhanced security, set handset to require pattern
drawing or password/Lock No. passcode entry for unlocking
screen as needed. See "Lock & Security Settings" for details.
Other Methods for Turning On Display
Set Display to turn on when handset is gripped (Grip
Magic) or when Display is Flicked (Sweep ON). See
"Operating by Gripping Handset (Grip Magic)" and "On/Off
with Motion Settings" for details.
Updating Software
Software Updates
At specified time, handset automatically checks for/downloads
firmware updates as required.
・Software Update cannot be performed if application or
function is in use.
・Alternatively, update firmware manually.
Software Update Cautions
Applications
Applications may be updated or newly added, or names,
icons, operations and user interfaces of applications may
be changed.
During Update
Handset cannot be used until Software Update completes;
it may take some time to complete.
Data Backup
Saved data may be lost depending on condition of handset
(malfunctioning, damaged, water seepage, etc.). It is
recommended that you back up important data before
updating software. SoftBank Corp. is not responsible for
damages from loss of data.
To Next Page
Loading...
Need help?
General
