Sharp LC-32LB261U User Manual

8
LC-32LB261U Sharp 32" LED TV
TV components
Package contents
•32" LED TV
• Remote control and batteries (2 AAA)
• TV stand and screws (4)
•Power cord
• Quick Setup Guide
• Important Information
Front
Front buttons
# Item Description
1
Remote control
sensor
Receives signals from the remote
control. Do not block.
2
Power indicator
Lights blue when your TV is on.
Lights red when your TV is off
(standby mode).
# Item Description
1
MENU
Press to open the on-screen
menu. For more information, see
“Navigating the menus” on
page 41.
2
INPUT
Press one or more times to select
the video input source your want,
then wait a few seconds. Your TV
switches to the source you
selected. For more information,
see “Selecting the video input
source” on page 40.
In menu mode, press to confirm
selections.
3
VOL+/VOL–
Press to increase or decrease the
volume.
4
CH /CH
Press to go to the next or previous
channel in the channel list. For
more information, see “Selecting
a channel” on page 42.
5
( power)
Press to turn your TV on or off
(standby mode).
Warning: When your TV is off,
power still flows through it. To
completely disconnect power,
unplug the power cord.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds