38
LC-32LB261U Sharp 32" LED TV
Turning on your TV for
the first time
The first time you turn on your TV, the Easy Setup wizard opens.
The wizard guides you through setting up basic settings.
1 Make sure that you have:
• Installed the remote control batteries. (See page 36 for
details.)
• Connected an antenna, cable TV, or satellite TV. (See page
13 through 18 for details.)
• Connected the power cord. (See page 35 for details.)
2 Press (power) to turn on your TV.
3 Press
S or T to highlight a language, then press ENTER.
4 Press
W or X to highlight Home Use Mode or Store Display
Mode, then press ENTER.
If you selected Store Display Mode, a message asks if you
are sure you want this mode. Select OK to continue using
Store Display Mode, or select Cancel to change to Home
Use Mode, then press ENTER. Store Display Mode is not
an energy savings mode.
5 Press
W or X to highlight an option, then press ENTER. You
can select:
• Watch TV to skip the customization options. You can
press MENU later to access the on-screen menus and
customize viewing settings. Go to “Finish the wizard” on
page 39.
• Customize TV to set viewing options to maximize your
viewing experience. Go to “Customize my TV” on page 38.
Customize my TV
6 Press
S or T to highlight a time zone, then press ENTER.
7 Press
S or T to select On to turn on Daylight Saving Time
or Off to turn off Daylight Saving Time, then press ENTER.
8 Press
W X or ENTER to highlight Month, Day, or Year, then
press S or T adjust the setting. When you are finished, use
the arrow buttons to highlight Next, then press ENTER.
To Next Page
Loading...
Need help?
General
