46
LC-32LB261U Sharp 32" LED TV
6 Press W or X to highlight On (turns on your TV when you
turn on the connected device) or Off (does not turn on your
TV when you turn on the connected device), then press
ENTER.
7 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Turning Audio Return Channel on or off
When CEC Control is turned on and you have connected an
audio receiver to your TV, turning on Audio Return Channel
lets you use your TV’s remote control to control the volume on
the audio receiver.
1 Press MENU.
2 Press
W or X to highlight
Settings, then press ENTER.
3 Press
S or T to highlight CEC,
then press ENTER.
4 Make sure that the CEC Control option is turned on. See
“Turning CEC Control on or off” on page 44.
5 On the Settings · CEC menu, press
S or T to highlight Audio
Return Channel, then press ENTER or X to access the
opion.
6 Press
W or X to highlight On (your TV’s remote control
controls the connected audio receiver’s volume) or Off
(your TV’s remote control does not control the connected
audio receiver’s volume), then press ENTER.
7 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Displaying a list of CEC-compatible devices
You can display a list of HDMI CEC devices that are connected
to your TV.
1 Press MENU.
2 Press
W or X to highlight
Settings, then press ENTER.
3 Press
S or T to highlight CEC,
then press ENTER.
4 Make sure that the CEC Control option is turned on. See
“Turning CEC Control on or off” on page 44.
5 On the Settings · CEC menu, press
S or T to highlight CEC
Device Lists, then press ENTER. A list of the HDMI
CEC-compatible devices you have connected appears.
6 Press MENU to return to the previous menu, or press EXIT
to close the menu.
To Next Page
Loading...
