Sharp LC-32LB261U User Manual

63
LC-32LB261U Sharp 32" LED TV
4 Press the number buttons to
enter the four-digit password.
5 Press
S or T to highlight Open V-CHIP, then press ENTER.
The screen that you see may vary depending on the
broadcaster.
6 Press
S T W or X to select the
program and content types
you want to block, then press
ENTER.
7 To reset the V-Chip information to the factory default, press
S or T to highlight Reset Downloadable Data, then press
ENTER. A box opens.
8 Press
S or T to highlight OK or Cancel, then press ENTER.
9 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Locking control buttons
When the button lock is turned On, the buttons on the side of
your TV are locked, and you can only operate your TV using the
remote control.
1 Press MENU.
2 Press
W or X to highlight
Settings, then press
T or
ENTER.
3 Press
S or T to highlight Button Lock, then press ENTER or
X to access the option.
4 Press
W or X to select On (locks the buttons) or Off (unlocks
the buttons).
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds