Sharp LC-32LB261U User Manual

43
LC-32LB261U Sharp 32" LED TV
Switching back to the Roku Streaming Stick
1 Press INPUT, then press S or T to select HDMI 2 (Roku).
OR
Press MENU, then press
W or X to highlight Roku.
2 Press ENTER to access your Roku Streaming Stick™. Your
stick’s menu opens.
3 Use
S T W X and ENTER to navigate on your Roku
Streaming Stick™.
Using an MHL-enabled
device
You can connect your MHL-enabled device, such as
a cell phone, and view your device’s screen on your
TV.
Connecting and using
1 Connect an MHL-enabled device to your TV. For connection
instructions, see “Connecting an MHL-enabled device” on
page 23. A message tells you the device is connected.
2 Press ENTER to access your MHL-enabled device. Your
device’s menu opens.
3 Use
S T W X and ENTER to navigate on your device.
Note
Your Roku Streaming Stick’s menu will
vary depending on the content you have
loaded on the device.
Note
You must use the purple HDMI 2/MHL
jack to connect an MHL-enabled device.
Note
Your device’s menu will vary depending on
the device and the apps you have loaded
on the device.
Note
The buttons you use to navigate on your
device may vary depending on the device.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds