Sharp LC-32LB261U User Manual

32
LC-32LB261U Sharp 32" LED TV
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar to the digital audio jack.
Digital audio
1 Make sure that your TV’s power cord is unplugged and the external speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV and to
the optical AUDIO IN jack on the external speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the external speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the external speaker system or sound bar.
5 On your TV, highlight the Digital Audio Format/Audio Delay option on the Sound menu, then press ENTER. Set the
Audio Format option to PCM. See “Adjusting sound settings” on page 53.
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
External speaker
system
Digital optical audio cable
Back of TV
Sound bar

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds