70
LC-32LB261U Sharp 32" LED TV
3 Press S or T to highlight
System Info, then press
ENTER. Information about the
TV software version is
displayed.
4 If your TV uses open source software, press ENTER to view
the Open Source Software Notice.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Learning more
You can learn more about Roku, MHL, remote control codes,
and connecting a sound bar.
1 Press MENU.
2 Press
W or X to highlight HELP,
then press ENTER.
3 Press
S or T to highlight Learn
More, then press ENTER.
4 Press
S or T to highlight a topic, then press ENTER. Your TV
displays information about the topic you selected.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Updating the TV firmware
If your TV is behaving oddly and you have tried all the solutions
in the troubleshooting pages, you may need to update the TV
firmware.
1 On the Help menu, select System Info, then write down
your model, revision, and firmware information. See
“Viewing system information” on page 69.
2 Go to http://www.sharpusa.com.
3 Click Support in the upper right corner, then under
Consumer, click Product Downloads.
4 Click LED TVs, then enter LC-32LB261U in the Enter LED
TVs Model Number box and click Search.
5 Under the image of your TV, click Next. If available, the
most current firmware version is listed.
6 Download the firmware update and copy it to a USB flash
drive.
7 Plug the USB flash drive into the USB port on the side of
your TV. A message asks if you want to update the firmware.
8 Highlight Ye s , then press ENTER.
9 Follow the on-screen instructios to install the update. Do
not turn off your TV until the update is complete.
Cautions
• Make sure that you have tried all other
solutions before you upgrade the
firmware.
• While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
• Computer with an available USB port
• High-speed Internet connection
•USB flash drive
To Next Page
Loading...
Need help?
General
