Sharp LC-32LB261U User Manual

40
LC-32LB261U Sharp 32" LED TV
Understanding the
basics
Turning your TV on or off
1 Make sure that the power cord is connected to a power
outlet. See “Connecting power” on page 35.
2 Press POWER to turn on your TV. The power indicator
turns blue.
3 Press POWER again to turn off your TV. Your TV enters
standby mode, and the power indicator turns red.
Selecting the video input source
1 Turn on your TV, then press INPUT.
2 Press
S or T to select a video input source, then press
ENTER.
On-screen menu overview
Access
Accessing the menus
1 Press MENU.
2 Press
W or X to highlight a menu icon, then press ENTER.
Picture menu (TV mode)
Sound menu (TV mode)
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
Note
The INPUT SOURCE list displays
Component when a component video
device is connected and turned on or
displays AV when an AV device is
connected and turned on.
Notes
• Depending on the signal source selected, you may
see different options on your screen.
• Menu items that are not selectable are grayed out.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds