Sharp LC-32LB261U User Manual

55
LC-32LB261U Sharp 32" LED TV
Playing TV audio only
You can turn off the picture on your TV and listen to the
program audio only.
1 Press MENU,
2 Press
W or X to highlight
Channels, then press ENTER.
3 Press
S or T to highlight Audio Only, then press ENTER or
X to access the option.
4 Press
W or X to select On.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Changing channel
settings
Automatically scanning for channels
When you scan for channels, your TV searches for channels
with signals and stores the channel information in the channel
list. When you press CH or CH , your TV goes to the next
or previous channel in the channel list.
If the TV signal source changes, for example you change from
an outdoor antenna to cable TV (no box), you need to scan for
channels.
1 Press MENU.
2 Press
W or X to highlight
Channels, then press ENTER.
3 Press
S or T to highlight Auto Channel Search, then press
ENTER.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds