44
Operation with a PABX
Gigaset A200 / englisch / A31008-A200-B101-1-7619 / pabx.fm / 16.01.2003
Setting pauses
Changing pause after line seizure
You can set the length of the pause that is inserted between pressing the talk key c
and sending the phone number (default setting: 3 secs.).
Changing pause after recall key (dialling pause)
You can change the length of the dialling pause if your PABX requires this (refer to your
PABX operating instructions).
Temporary switch to tone dialling (DTMF)
If your PABX works with pulse dialling but you need tone dialling for a call (e.g. to listen
to an external mail box/answering machine), you must switch to pulse dialling during
the call.
Requirement: You have already started the call.
[_______________]
MENU
Press display key to open menu.
Press keys N O 1 L. "916 SET" appears in
the display. The number for the currently set pause
length flashes. 1 = 1 sec.; 2 = 3 secs.; 3 = 7 secs.;
4 =2.5 secs.
[_____ _]
OK
Enter number and confirm.
[_______________]
MENU
Press display key to open menu.
Enter N O 1 2. "912 SET" appears in the dis-
play. The number for the currently set pause length
flashes.
1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms.
[_____ _]
OK
Enter number and confirm.
i
To insert a dialling pause between a prefix and a phone number: After
entering the prefix, hold down the S key for 2 seconds. A "P" appears in
the display. Then enter the phone number.
[_______________]
MENU
Press display key to open menu.
[__________] [______________________________________________] [__________]
TEMP TONE OK
Select and confirm. Tone dialling is set for this call.
To Next Page
Loading...
Need help?
General