Making calls with multiple lines
117
Step by Step
Putting a line on hold
On a multi-line telephone you can use the line keys to
place calls on hold.
Prerequisite: You are conducting a call.
R Press the call-line sensor key.
T • The LED line key flashes.
• The LED line displays the hold status on all multi-line
phones to which the line is connected.
• On phones connected to the line, a user can press
the relevant line key and accept the held call.
During a consultation call or after accepting a waiting
call the hold function cannot be used.
Lines with hot or warm line function
Your service personnel can configure a hot or warm line
for the primary and secondary line.
The function is activated when on
• the primary line you lift the handset on the phone
and press the line or loudspeaker key
den Hörer des Telefons abnehmen oder die Lei-
tungs- oder Lautsprechertaste, drücken
• the secondary line
you press the line key.
A number specified by you is dialed with a hot line im-
mediately and with a warm line after a specific time.
Examples:
• The phone in the lift immediately dials the reception
number.
• The phone at a patient’s bed dials the ward number
e.g. after a minute if no other number is dialed.
To Next Page
Loading...
Need help?
General