Siemens OpenStage 60 SIP Operating Manual

Step by Step
Making calls with multiple lines
136
Settings for multi-line phones (keyset)
The details for each keyset line contain supplementary
information for the user. The following uneditable fields
are displayed:
•Address
– Displays the phone number for the line
• Ring on/off
– Shows whether the ringer is activated for this line
• Selection sequence
– Displays the priority of each line seizure when the
handset is lifted or the loudspeaker key for this
line is pressed
Displaying the line in the "Overview" tab
Specify here if the selected line should be displayed in
the "Overview" tab.
z
You can also configure this setting via the Web interface
Æ page 230.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required line (e.g. primary line).
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
User
Configuration
Keyset
Lines
Primary Line 1
Allow in overview
Yes
Save & exit

Siemens OpenStage 60 SIP Specifications

General

Brand	Siemens
Model	OpenStage 60 SIP
Category	IP Phone
Language	English