Siemens OpenStage 60 SIP Operating Manual

Making calls with multiple lines
129
Step by Step
Prerequisites:
The E/A Cockpit application is installed on the phone
and the connection to a E/A Cockpit server entered.
"Allow call waiting" should be activated on the secreta-
ries’ phones (Æ page 97). Line and DSS keys have been
set up and configured by service personnel and Transfer
on hangup, uaCSTA and server features are activated.
Function overview
The following tasks can be performed using the E/A
Cockpit application:
• Call forwarding management on the executive pho-
nes
– Calls are forwarded to the secretary phone
– Call forwarding is deactivated.
– Calls are forwarded to a mobile phone
– Calls are forwarded to a variable number
• Call forwarding for an executive phone can be confi-
gured directly on the executive phone or from the
secretary phone.
• Call forwarding can be attached to a condition
• Secretary status management
– Presence status
– Call forwarding destination configuration
– Representative activation and deactivation
• The presence and call forwarding status can be read
on each secretary phone and on the respective as-
sociated executive phone.
• The presence status and required call forwarding for
the secretary can be set from both the secretary
and associated executive phone.
• DSS keys can be used
• Connecting calls with and without consultation
• Calling configured executive mobile numbers and
connecting calls.
• Answering and connecting calls
• Second call

Siemens OpenStage 60 SIP Specifications

General

Brand	Siemens
Model	OpenStage 60 SIP
Category	IP Phone
Language	English