9-6
TP27, TP37 Equipment Manual
Release 01/00
Help
Call Help text on standard screen
ESC
Exit from standard screen
Use Slot B to plug the memory card into the TP37 and TP27–10. Only one slot
is available in the TP27–6. The slot is described for TP37 in chapter 16.3, for
TP27-10 in chapter 15.3 and for TP27-6 in chapter 14.3.
A backup flash ! module process can be carried out in normal operation of
the Touch Panel:
Step Action
1 Insert the memory card in Slot B of the Touch Panel.
2 Delete the memory card contents before initiating the backup
(see chapter 9.2).
3 Start the backup function by touching the corresponding button on
the Backup/Restore standard screen. After successful transfer, a
message is appears on the Touch Panel.
4 Remove the memory card from the Touch Panel.
If a memory card only contains recipe data records, they can be restored to the
Touch Panel in normal operating mode:
Step Action
1 Insert the memory card in Slot B of the Touch Panel.
2 Start the restore function by touching the corresponding button on
the Backup/Restore standard screen.
The recipe data records in the internal flash memory are
overwritten by the data records read in from the memory card.
3 Remove the memory card from the Touch Panel.
Note
Recipe data records, stored on the memory card using Backup, must first be
transferred to the internal flash using the Touch Panel with the Restore func-
tion before they can be edited.
Recipe data records, saved directly on the memory card (e.g. using standard
screen Data Record Processing and Transmission), cannot
be transferred back
into the internal flash using Restore.
Insert memory
card
Backup
flash ³ module
Restore
module ³ flash
Storin
and Loadin
Data
To Next Page
Loading...
Need help?
General
