11-8
TP27, TP37 Equipment Manual
Release 01/00
11.5 Other Settings
The current date and time can be set on the Touch Panel in order, for example,
to make adjustments for summer and winter time. Any change affects all the
fields which display a date and time variable. The display format for date and
time is set in the configuration and cannot be changed later on the Touch Panel.
Procedure:
Touch the Date or Time field in the System Settings standard screen. Enter the
current values in the correct format in the edit window. Enter the periods as
well.
The Touch Panel saves the current date and time in the non–volatile memory.
The configuration can be loaded onto the Touch Panel in up to three languages.
It is possible to switch to any of the languages at any time in Online mode.
After switching to another language, all passages of language–dependent text
are displayed in the new language.
Procedure:
Touch the button depicted on the right on the System Settings stan-
dard screen. The languages are scrolled, one by one, each time the
button is pressed.
I
D
F GBR
USA
E
The Touch Panel saves the current language setting in non–volatile memory.
The next time the Touch Panel is switched on all the language–dependent text
passages are displayed in the last language you set.
The Touch Panel acknowledges contact with a touch element by issuing an
acoustic signal. This signal takes the form of a tone audible while contact is
made. The procedure for adjusting the volume of this audible tone online is as
follows:
S TP27: “high”, “low” or “off”,
S TP37: “ON” or “OFF”.
Procedure, TP27:
The default setting is “high” volume. Each time the button on the
right is touched in the System Settings standard screen, the volume
is adjusted, cyclically, to the next setting: High –> Off –> Low –>
High.
Date/Time
Language
Adjusting volume
S
stem Settin
s
To Next Page
Loading...
Need help?
General
