8-3
TP27, TP37 Equipment Manual
Release 01/00
8.1 Standard Screens for Recipes
In order to create, save and download data records using the Touch Panel, the
standard screen Data Record Processing and Transmission must be integrated
in the configuration. The Selective Data Record Transmission standard screen
need only be integrated in the configuration when current data has to be
exchanged between the Touch Panel and PLC.
Data records are created, modified and deleted using the standard screen Data
Record Processing and Transmission. It is also possible to use the standard
screen to transfer data records from data media (flash or memory card) to the
PLC or vice versa. The standard screen Selective Data Record Transmission is
only required when data records need to be transferred between specific Touch
Panels, data media or PLCs. A detailed description of handling standard
screens is provided in Section 8.1.1.
Use the standard screen Data Record Processing and Transmission (figure 8-2)
to
S create and edit data records on the Touch Panel and save these records on a
data medium,
S transfer the records from data media to the main memory of the Touch
Panel and from there to the PLC,
TP
PLC
Flash/
memory
card
Main
memory
Data
medium
SRAM
S delete data records on the data medium
S edit data records on the Touch Panel.
The structure of a recipe cannot be modified on the Touch Panel.
Condition
Purpose
Standard screen
Edit Data Records
Recipes
To Next Page
Loading...
Need help?
General
