SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
17
Installing and connecting the device
Preparing for installation
3.1.1
Checking the delivery package
Procedure
1. When accepting a delivery, check the packaging for visible transport damage.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
3. Unpack the device at its installation location.
4. Keep the original packaging in case you have to transport the unit again.
5. Check the contents of the packaging and any accessories you ordered for completeness
and damage.
Note
Damage to the device during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and
moisture may i
mpact the unprotected unit. A damaged packaging indicates that ambient
conditions have already had an impact on the device.
The device might be damaged.
Do not dispose of the original packaging. Pack the device during transportation and
storage.
To Next Page
Loading...
Need help?
General
