Siemens Simatic IPC527G User Manual

Technical specifications
7.6 BIOS description
SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
87
7.6.4
Hardware Monitor menu
Hardware Monitor menu
The Hardware Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
System
parameters
Function description
Configuration
options
Default setting
CPU / Sys-
tem Tem-
perature
The onboard hardware monitor automatically detects and dis-
plays the CPU / system temperatures. Select [Ignore]
if you do
not need to display the detected temperature, select [Ignore] .
• [xxxºC/xxxºF]
• [Ignore]
[xxxºC/xxxºF]
CPU / CHA
Fan Speed
The onboard hardware monitor automatically detects and dis-
plays the CPU / chassis fan speeds in rotations per minute
(RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select [Ignore]
if you do not need to display the de-
tected speed.
• [xxxx RPM]
• [Ignore]
• [N/A]
[N/A]
CPU
VCORE,
+3.3V, +5V,
+12V
The onboard hardware monitor automatically detects the voltage
output through the onboard voltage regulators. Select [Ignore]
if
you do not want to detect this item.
• [Actual Value]
[Actual Value]
CPU Fan
Control
Control the CPU fan.
• [Disabled Mode]: The CPU fan runs at full speed.
• [Auto Mode]: The CPU fan speed changes automatically
according to the CPU temperature.
• [Disabled
Mode]
• [Auto Mode]
[Auto Mode]
CHA Fan1
Control
Control the chassis fan.
• [Auto Mode]: The chassis fan speed changes automatically
according to the motherboard temperature.
• [Silent Mode]: The chassis fan runs at low speed with less
noise.
• [Disabled Mode]: The chassis fan runs at full speed.
• [Auto Mode]
• [Silent Mode]
• [Disabled
Mode]
[Auto Mode]

Siemens Simatic IPC527G Specifications

General

Brand	Siemens
Model	Simatic IPC527G
Category	Industrial PC
Language	English